Home » Products » Sealants » Smoothfix




Smoothfix Data Sheet   
Product DescriptionSmoothfix is a premium quality, ready-for-use, One-component sealant which reacts with atmospheric moisture at room temperature to form an elastic rubber like seal
Typical ApplicationsBonding of frameless aquariums, all-glass assemblies, laminated glass.
ApplicationAdhesion surfaces must be clean, dry, sound and free from dust and release agents. Do not use primer on glass and glazed surfaces. Use Primer TECNICON FD for porous surfaces. On metals Primer TECNICON 790 and on plastics Primer TECNICON FDK may optimize sealant adhesion. Please refer to Primer Chart for recommended surface preparation.
Cure SystemAcetoxy
Density1.03 g/cm 3DIN 52451
Application Temperature+5°C to +40°C
Service Temperature-60°C to +180°C  DIN 52455-4
Hardness Shore AApprox. 25 DIN 53505  ASTM D 2240-68
Modulus at 100 % Extension Approx. 0.4 N/mm 2 DIN 52455-2 EN 28 340
Elastic RecoveryApprox. 100% DIN 52458 EN 27 389
Movement Accomodation25%
Strength Coefficient0.1 N/mm 2
ViscosityNon sagging DIN 52454 EN 27 390
Skin Formation Time10 to 20 minutes
Cure RateApprox. 3 mm/24 h
Auto IgnitionApprox. 450°C DIN 51794
Safety LabellingNot required
SpecificationsMeets requirements of DIN 18545-D
Standard ColoursTranslucent
Packaging310 ml plastic cartridge, 20 cartridges/carton case. Special packaging upon request
StorageStore in cool and dry conditions in original packaging.
 Shelf life 18 months.
Precautions see EC Security Data Sheet. Keep away from children. Avoid skin and eye contact. After contact with skin or eyes rinse immediately with plenty of water and seek medical advice. Ensure adequate ventilation. The above specifications are the result of careful research and development. All previous specifications are hereby null and void. Users are themselves responsible for ensuring the suitability of the product for the purpose intended, liability on the part of B&N  being limited to the purchase price of the material. B&N cannot accept liability for damage, in particular that caused by the use of the product or its unsuitability, nor can B&N  accept responsibility for unauthorized recommendations or guarantees which deviate from or exceed the specifications given in this procuct data sheet.